Adjusting The Chain Tension - GreenWorks CS-80-XR-T Manual Del Propietário

MAINTENANCE

ADJUSTING THE CHAIN TENSION

W A R N I N G
Never touch or adjust the chain while the motor is running. The saw chain is very sharp. Always
wear protective gloves when performing maintenance on the chain.
• Loosen lock knob half a turn.
• Find the chain adjustment screw behind the chain and bar.
• Rotate the chain adjustment screw clockwise to increase the chain tension and rotate
counterclockwise to decrease the chain tension until the chain is at the desired tension.
• Once you have the correct tension, fully tighten the locking knob.
20