Master audio KEY8 Manual Usuario página 11

Master Audio
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Set the cabinet on the 35mm pole
4- Adjust the cabinet for desired angle
3.7.4. KEY8, KEY12 and KEY15 vertical flying with "HR" bar
Use HR8 flying bar for KEY8
Use HR1215 flying bar for KEY12
Use HR1215 flying bar for KEY15
Fig.17. "HR" flying bar for KEY cabinets
3.7.5. KEY18W flying
This model is not prepared for flying.
3.8. KEY grille
To remove the front grille, first remove the
screws on the left side.
Fig.18. Grille screws
KEY Series (Passive). Version 1.0 Jan14 11