Master audio KEY8 Manual Usuario página 3

Master Audio
2. CONNECTIONS
2.1. Connection description
Fig.1. KEY (passive) connectors
(1)-SPEAKON: All models use two Speakon terminals and are duly prepared for a
perfect connection in a parallel system. Terminal pins +1/-1 must be always used,
disregarding the +2/-2 which are not internally connected.
WARNING: It is strongly recommended to use a two-conductor high quality wire, non-
2
shielded and two-coloured. We recommend using a minimum section of 4mm for
each conductor. Avoid long wire distances as they induce to important power and
quality losses
2.2. Configurations
2.2.1. Full Range Stereo configuration
Connect each output of the amplifier LEFT/RIGHT to each cabinet using two
independent wires.
Fig.2. Full range stereo configuration
KEY Series (Passive). Version 1.0 Jan14 3