Before You Start; Names Of Parts; Speaker Support; Stand Stems - Pioneer CP-81B-K Manual De Instrucciones

Thank you for buying this Pioneer product.
Please read through these operating instructions for proper assembly and use. After you have finished reading the instructions, put them
away in a safe place for future reference.
This speaker stand can be used only with the following Pioneer speaker systems: S-81B-LR-K, S-81B-LR-QL, or S-81B-LR-W.

Before you start

Before setting up your speaker system, we recommend reading
the operating instructions for your system thoroughly.
• Only use the screws supplied when fixing the speaker to the
speaker stand.
• Do not place the stand on an unstable and/or sloping surface.
The stand and speaker may fall and cause injury.
• Do not use with any speaker system other than the one for
which the unit was designed. The stand may collapse and be
damaged and/or the speaker may fall and cause injury.
• When moving the speaker and stand, first remove the speaker
from the stand, and then move the stand, holding it by the
stems.
• Place the stand on a stable, level surface; placing the stand on
an unstable surface can be dangerous.
• Pioneer assumes no liability whatsoever for damages
resulting from assembly, improper mounting, insufficient
reinforcement, misuse of the product, acts of nature, etc.
2
En

Names of Parts

Speaker support

Stand stems

Stand base

Screw holes for
securing speaker