Indicators (Ref. To Fig. 1) - HUEGLI TECH HT DST4602 Manual De Uso

4.5

Indicators (ref. to fig. 1)

8
User's Manual HT DST4602
LED OFF

Signalling Function

Signals at least one lockout or power-off or unload anomaly.
Signals at least one lockout or power-off which has not yet been

ALARM
acknowledged with the "ACK/TEST"

No lockouts, power-offs, or unload functions.

There is at least one active warning.
Signals at least one warning which has not yet been acknowledged
WARNING

with the "ACK/TEST"

No warnings.
Signals an active inhibit command from digital input, clock/calendar

or load function.
It means that the input status is active, but the set waiting time hasn't
INHIBIT

elapsed.

Means an inhibition command is active.

Means at least one of the two serial ports is active.
SERIAL
PORTS

Means at least one of the two serial ports isn't active.
Signals that the CAN0 interface is active and in ERROR-ACTIVE

mode. (J1939 o MTU).
Flashing at 25% ON signals a COM error (J1939 or MTU): the port is
in ERROR-PASSIVE mode.
CAN0

Flashing at 75% ON signals a COM error (J1939 or MTU): the port is
in BUS-OFF mode.

Signals that CAN0 has been disabled.
Signals that the CAN1 interface is active and in ERROR-ACTIVE

mode. Power Management COmmunication Bus (PMCB).
Flashing at 25% ON signals a COM error: the port is in ERROR-
PASSIVE mode.

Power Management Communication Bus (PMCB).
CAN1
Flashing at 75% ON signals a COM error: the port is in BUS-OFF
mode.
Power Management Communication Bus (PMCB).
Signals that CAN1 has been disabled. Power Management

Communication Bus (PMCB).
Signals that the CAN2 interface is active and in ERROR-ACTIVE

mode. Expansion Modules Bus (Ex-Bus).
Flashing at 25% ON signals a COM error: the port is in ERROR-

PASSIVE
CAN2
Expansion Modules Bus (Ex-Bus).
Flashing at 75% ON signals a COM error: the port is in BUS-
OFFmode. Expansion Modules Bus (Ex-Bus).

Signals CAN2 has been disabled. Expansion Modules Bus (Ex-Bus).

Signals BUS line ON.

Signals BUS line OFF.
BUS LIVE
Flashes at 50% during the synchronization phase (opposite

sequence to MCB or GCB).
LED steady ON

button.
mode
.
LED flashing

button.