Bottom Status Bar (Ref. To Fig. 5); Display Mode; Programming (P.xx) (Ref. To Fig. 6) - HUEGLI TECH HT DST4602 Manual De Uso

4.6.7

Bottom status bar (ref. to fig. 5)

The bottom status bar displays some information on the system status.
2a - Operating mode
2b - System status
Operating mode (2a) is controlled by the lockable selector.
System status (2b) displays part of the information on page S.01 (STATUS) which is useful for the operator, as it
can be displayed also if other pages are being viewed and in other display modes.
In some pages, pressing the SHIFT
down with a HELP message. If the message is unavailable, the bar is cleared and restored when the button is
released.
4.7

Display mode

4.7.1

Programming (P.xx) (ref. to Fig. 6).

WARNING: The parameters must only be changed by qualified personnel. Assigning an incorrect
value to one or more parameters can cause malfunctions, damage to things and/or injury to people.
Information!: Parameters may be password protected (see par. 4.7.1.1 Access codes).
This mode lets you display and change the programming parameters.
Each programming parameter has a 4-digit numeric code (ex. P.0101) to identify the variables regardless of the
language used.
The first line under the top status bar identifies the current menu with the menu number and the relevant text.
A pair of numbers are displayed on the right in this line. The first indicates which entry in the menu is selected or
which page is displayed, the seconds indicates how many entries or pages can be displayed in the current
menu/submenu.
1a – Menu Item/Page
1b – Total Pages Menu/submenu
12
User's Manual HT DST4602
OFF
2a
Fig. 5 - Bottom status bar
1.3
Fig. 6 - Bottom status bar
|Engine stopped
button replaces the bottom status bar for the time the button is held
P.07 PROGRAMMING
Generator
2b
18/07/11 18:23
1a
-
2/07
1b