Multifunctional Display; Lcd Lighting; Contrast - HUEGLI TECH HT DST4602 Manual De Uso

4.6

Multifunctional display

4.6.1

LCD lighting

The backlight lamp is managed by the Gen-set control module, which switches off the backlight after a
programmable time (P.492) if no buttons are pressed in the meantime. Press any button to switch the
lamp ON again, (we recommend using the SHIFT
This
4.6.2

Contrast

The contrast can be adjusted by pressing the SHIFT
contrast or the SHIFT
Signalling Function
Network/Bus mains power is OFF or MAINS SIMULATION digital

input is disabled.
Mains power is ON and stable in the range of tolerance, or MAINS

SIMULATION digital input is enabled from the set time.
MAINS LIVE

Flashes at 50% during transition between the previous two states.
 Generator voltage and frequency are not present.
Generator voltage and frequency are present and stead within the

GENERATOR
tolerance range.
LIVE

Flashes at 50% during transition between the previous two states.

The engine is OFF.
ENGINE
 The engine is running
RUNNING

Cooling phase
 The MCB is open.

The MCB is closed
Flashes at 25% ON if open after a closing command.
MCB

Flashing at 75% ON if closed after an opening command.
Flashing at 50% in synchronization phase with BUS LIVE indicator.

The MCB is open.

The MCB is closed
Flashing at 25% ON if the KG is open after a closing command.
GCB

Flashing at 75% ON if closed after an opening command.
Flashing at 50% in synchronization phase with BUS LIVE indicator.
function can be
+RIGHT
button as it has no function when used alone).
disabled by setting
+ LEFT
buttons to increase it.
parameter P.492 to
buttons to decrease the
User's Manual HT DST4602
0.
9