In Case Of Difficulty - Honeywell Home PRO 1000 Serie Manual De Funcionamiento

In case of difficulty

If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is blank
Heating or
cooling system
does not respond
• Make sure fresh AAA alkaline batteries are correctly installed (see
page 9).
• Set system switch to Heat (see page 5). Make sure the temperature
is set higher than the Inside temperature.
• Set system switch to Cool (see page 5). Make sure the temperature
is set lower than the Inside temperature.
• Wait 5 minutes for the system to respond.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
11
PRO 1000
69-2607EFS—06