Dash Disassembly - Metra 99-5827B Instrucciones De Instalación

1. Remove the screw cover facing up on
the bottom of the radio control panel.
(Figure A)
2. Remove (2) T-25 Torx screws from under
the cover. (Figure B)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
3. Unclip and remove the entire radio
control panel including the A/C vents.
(Figure C)
4. Remove (4) T-25 Torx screws securing
the radio and (4) T-25 Torx screws
securing the factory display and bracket.
(Figure D)
Continue to Kit Preparation
(Figure C)
(Figure D)
|
1.800.221.0932 MetraOnline.com