Sony STR-DN1060 Guía De Referencia página 9

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA models only)
STR-DN1060:
With 6 ohm loads, both channels driven,
from 20 Hz – 20,000 Hz; rated 100 watts
per channel minimum RMS power, with
no more than 0.09% total harmonic
distortion from 250 milliwatts to rated
output.
STR-DN860:
With 6 ohm loads, both channels driven,
from 20 Hz – 20,000 Hz; rated 95 watts
per channel minimum RMS power, with
no more than 0.09% total harmonic
distortion from 250 milliwatts to rated
output.
Amplifier section
STR-DN1060
USA, Canadian, Australian and Taiwanese
1)
models :
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
120 W + 120 W
Surround Mode Output Power
(6 ohms, 1 kHz, THD 0.9%)
165 W per channel
Singaporean models
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
120 W + 120 W
Surround Mode Output Power
(6 ohms, 1 kHz, THD 0.9%)
150 W per channel
2)
1)
:
2)
STR-DN860
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
95 W + 95 W
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
110 W + 110 W
Surround Mode Output Power
(6 ohms, 1 kHz, THD 0.9%)
150 W per channel
1)
Measured under the following
conditions:
Area
USA, Canada, Taiwan
Australia, Singapore
2)
Reference power output for front, center,
surround, surround back and front high
speakers. Depending on the sound field
settings and the source, there may be no
sound output.
Frequency response
Analog
10 Hz – 100 kHz, +0.5/–2 dB (with
sound field and equalizer
bypassed)
Input
Analog
Sensitivity: 500 mV/50 kilohms
3)
S/N : 105 dB (A, 500 mV
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
5)
ZONE 2
Voltage: 2 V/1 kilohm
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and
equalizer bypassed).
4)
Weighted network, input level.
5)
STR-DN1060 only.
1)
1)
1)2)
Power
requirements
120 V AC, 60 Hz
230 V AC, 50 Hz
4)
)
9
GB