Metra 99-9700 Instrucciones De Instalación página 3

5. Remove (11) screws securing the
radio bracket: (Figure E)
5.1 (2) T-27 Torx screws shared
with the gauge cluster and a
third T-27 Torx screw to remove
the gauge cluster in step 7.
5.2 (4) 5/32" Allen screws
facing outward.
5.3 (4) T-25 Torx screws secured
to the radio.
5.4 (1) T-25 Torx screw shared
with the storage pocket.
6. Remove the radio bracket. (Figure E)
Note: This bracket will be reused
with the 99-9700 kit.
7. Remove the gauge cluster. (Figure E)
8. Remove (4) 3/16 Allen screws from
the sides of radio. (Figure F)
Note: These screws will be reused
with the 9700 kit.
9. Slide the radio out toward the rear
of the bike, and unplug the radio.
(Figure F)
Harley Davidson Street Glide, Electra Glide, Ultra,
and Limited models 2014-Up Disassembly
(Figure E)
99-9700
(Figure F)
3