Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS FOR PART 99-9700
If the Oil/EITMS information do not show up on the kit, perform this step;
• Press and hold the "Return/ESC" button on the LCD screen for 5 seconds until "Select Interface"
comes up.
• Select "Connection Type", and then press "Enter"
• Scroll up or down to "Direct Connect", and then press "Enter"
• Once done, press "Return/ESC" to back out of that mode.
Updating the 99-9700
• Download and install the WebXXpress software update from axxessinterfaces.com. Please follow
the instructions on the website exactly as stated.
• Connect the USB-MINI-CAB update cable (sold separately) between the 99-9700 and the computer.
• From the Start Menu of the computer, click on on "All Programs", and then "USBBootloader".
• Press "Update Board", the software will begin to download at this point.
Note: Please note which firmware downloaded to the interface. This will help in troubleshooting,
if need be.
Note: Both the interface AND display screen must be updated.
METRA. The World's best kits.
Troubleshooting
™
metraonline.com
If you are having difficulties with the installation
of this product, contact our Tech Support line
either by phone at 386-257-1187, or email at
techsupport@metra-autosound.com. Before
doing so, look over the instruction booklet a
second time and ensure that the installation was
performed exactly as the instruction booklet
is stated. Have the vehicle apart and ready to
perform troubleshooting steps before contacting
Metra/Axxess Tech Support.
K
®
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
P
OWER
Publicidad
Tabla de contenido
