Daikin Siesta AHQ71CV1 Manual De Instalación página 8

Installation - Ceiling Exposed Type
Step 1
Remove air intake grille, side panel and hanger bracket from the unit. Please refer to Figure F.
Figure F
Step 2
Position the hanger rod as shown in Figure G and install the hanger bracket.
Figure G
Step 3
Hang up the unit and tighten the bolts after installation of piping and drain pipe. Please refer to Figure H.
Lastly install the intake grille and side panel to the correct position. Please refer to Figure I.
Figure H
Hanger Bracket
Intake grille
1-6
Side Panel