Before You Start; During Operation - La Cimbali M26 Uso E Instalacion

6. Prescrizioni per l'operatore 6. Rules for the worker operating the machine

BEFORE YOU START

WARNING: BEFORE YOU START OPERATING THE MACHINE, WASH THE
INTERNAL COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED
BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE MA-
CHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
Groups
•
• Let each group dispense water for about a minute.
Hot Water
• DT version with display. Run the water replacement as indicated in the section "Changing the
water in the boiler".
• C version / DT version without display. Continuously dispense hot water (pressing the
appropriate button) until at least 5 liters of water have been used for a machine with 2 groups,
and 8 liters for a machine with 3 groups.
See the "Hot water dispensing" chapter in the User's Manual.
Steam (also with Turbosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.

DURING OPERATION

Steam dispensing (also with Turbosteam)
• Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and
let the steam escape so that condensation is eliminated.
Coffee dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
Hot water dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
Cleaning the coffee
•
02_M26_UNICO_1817.indd 7
7 EN
03/05/2018 16:48:15