Service And Maintenance; Ec Declaration Of Conformity; Warranty Provisions - Proxxon LBS/E Manual

A diversity of additional fields of application
is supplemented if the LBS/E is combined
with other machines and devices!
Accessories:
A comprehensive range of accessories is list-
ed in our equipment catalogue!

Service and maintenance:

Caution:
Pull the mains plug before making any adjust-
ments, performing maintenance work, or car-
rying out repairs!
The scroll saw is basically maintenance free.
However, to ensure a long service life you
should clean the device after each use with a
soft cloth or brush.
External cleaning of the housing can be carried
out using a soft, possibly moist cloth. While
doing so, a mild detergent or other suitable
cleansing agent can be used. Do not use sol-
vents or cleansing agents containing alcohol
(e.g. benzene, cleaning alcohol, etc.) as these
can corrode the plastic housings.
Disposal:
Please do not dispose of the device in do-
mestic waste! The device contains valuable
substances that can be recycled. If you have
any questions about this, please contact your
local waste management enterprise or other
corresponding municipal facilities.

Warranty provisions:

All PROXXON products are thoroughly in-
spected after production. Should a defect oc-
cur nevertheless, please contact the dealer
from whom you purchased the product. Only
the dealer is responsible for handling all legal
warranty claims which refer exclusively to ma-
terial and manufacturer error.
Note:
Improper use, such as capacity overload,
damage due to outside influences and normal
wear are excluded from the warranty.
You will find further notes for each country re-
garding "Service and Spare Parts Manage-
ment" at www.proxxon.com.

EC Declaration of Conformity

Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: LBS/E
Article No.:
In sole responsibility, we declare that this prod-
uct conforms to the following directives and
normative documents:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 07.2012
EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 01.2010
Date: 01.08.2012
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is
identical with the signatory.
28485
- 9 -