Other Functions; Black Out - Chauvet Stage Designer 50 Instrucciones De Programacion

Stage Designer™ 50

Black Out

Dark
Hold
Blind and
Home
Reverse
Functions
% or 255
Add Kill
Full On

Other Functions

Black Out stops all DMX output from the controller. Functions will still work during Black Out, but
there will be no DMX output. To toggle Black Out:
Press <BLACKOUT>.
The indicator LED (yellow) for Black Out will be lit if Black Out is active.
At any time, pressing <DARK> will temporarily black out the controller. Releasing
<DARK> will restore DMX output. Scenes playing back will continue while <DARK>.
While a scene is playing back, press and hold <HOLD> to freeze DMX output to its current state.
Although DMX output will freeze, the scene will continue. Release <HOLD> to unfreeze.
Releasing <HOLD> will cause the output to jump to the step currently being processed.
Pressing <BLIND> and a channel's flash button at the same time will black out that channel.
Pressing <HOME> and a blinded channel's flash button at the same time will restore its
function.
There are four reverse functions available to the Stage Designer™ 50:
·
Beat Reverse: pressing <BEAT REV> will reverse the playback of all scenes that
have a beat recorded. This is effective even in Single Chase mode.
·
Chase Reverse: pressing <CHASE REV> will reverse the playback of all scenes that
do not have a beat recorded.
·
Reverse One: pressing <REV ONE> will reverse the playback of selected scenes.
·
All Reverse: pressing <ALL REV> will reverse the playback of all scenes.
NOTE: Reverse functions remain the same with Audio Triggering activated.
The Stage Designer™ 50 can display fader and auxiliary states as DMX values or as a percentage
out of 100. To toggle the number system:
Press and hold <RECORD>. Press <% or 255>. Release <RECORD>.
Pressing <ADD KILL> during playback will toggle Add Kill mode, which will be shown by the
indicator LED being lit.
In Add Kill mode, pressing a flash button (<1 / 36> – <24 / 48>) will bring that channel to full
output and black out all other channels. The scene will continue to play back in the background, but
only the selected channel will output.
Releasing the flash button will cause the output to jump to the step currently being processed
Pressing <FULL ON> will cause all 48 DMX channels to output 100%.
Releasing <FULL ON> will restore normal function. If a scene is playing back when
<FULL ON> is released, the output will jump to the step currently being processed
4
EN
.