Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

0GU3015
Installation and Owner`s Manual
Soiree ™ and Guinevere ™ Grab Bars
For best results, be sure to follow the installation instructions and use the product only as described
in the manual. Please describe how to properly use the products to the customer after installation.
Important Safeguards
Read the "Important Safeguards" section thoroughly before installing the product.
●The following symbols indicate safe and proper use of the product.
Failure to observe them may result in injury or property damage.
The symbols and their meanings are as follows:
Sign
Ignoring this symbol may result in injury
Warning
or property damage.
Do not try to disassemble or modify the grab bars by any means without
professional assistance. Do not disassemble or modify the items in any way not
Do not
described in this manual.
disassemble
Use all screws provided to properly mount the grab bars; improperly installed
grab bars can become unstable and loose, causing injuries.
Please use the attached wall screws to mount the products.
If product is not properly installed and screws are not securely tightned, you
may be hurt when it becomes loose.
Grab bars must be mounted to a secure wall, which has sufficient structural
Mandatory
strength so that they will not become unstable and loose and cause injuries. If
the wall is thin, reinforce it with a ½" (12mm) plywood or 2x4 studding before
installation. ASTM F446 should be referred for further information.
After installation, carefully and thoroughly check the grab bars and make sure
that they are securely mounted because loose grab bars can fall from the wall
and cause injuries.
Notes
Soiree™ and Guinevere™ Grab Bars must be mounted to a secure surface. TOTO® is not responsible for any consequences
caused by improper installation and/or lack of wall strength. It is the responsibility of the installer of the grab bars to make sure
that the mounting area the customer chooses is secure and that proper mounting hardware is used for installation.
Product Specifications
Item
Product Number
YG96024#CP
Soiree™
YG96042#CP
YG97024#CP
Guinevere™
YG97042#CP
(For your safety, please follow the instructions below)
Meaning
Warning
Product Description
24" Grab Bar
42" Grab Bar
24" Grab Bar
42" Grab Bar
®
The following table demonstrates the use of safety
symbols in this manual.
Do not disassemble!
The action must be performed
as described.
Finish*
Polished Chrome
Polished Chrome
Polished Chrome
Polished Chrome
* Other available finishes are mentioned in the manual.
2007.01
Stable!
TOTO
Reinforcement
stable
1

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Toto Soiree YG96024CP Serie

  • Página 1 Notes Soiree™ and Guinevere™ Grab Bars must be mounted to a secure surface. TOTO® is not responsible for any consequences caused by improper installation and/or lack of wall strength. It is the responsibility of the installer of the grab bars to make sure that the mounting area the customer chooses is secure and that proper mounting hardware is used for installation.
  • Página 2: Tools And Materials

    Available Finishes: Polished Chrome (#CP), Brushed Nickel (#BN), Polished Nickel (#PN), Oil Rubbed Bronze (#RB), Polished Brass (#PB), Rose Bronze (#RS), and Black Nickel (#BL). Soiree™ and Guinevere™ Grab Bars comply with ICC/ANSI A177.1, ASTM F446 and CSA guidelines. Soiree Guinevere 2-1/5”(64mm) 2-1/2”(64mm)
  • Página 3: Cleaning Instructions

    Determine the location Drill holes Make sure that the wall has sufficient structural strength. Determine the required location for grab bar installation. At least 2 screws at each mounting flange must mount For easy installation, a cut-out hole is provide at left end into a wood stud.
  • Página 4 TOTO® U.S.A., INC., 1155 Southern road, Morrow, Georgia 30260, (888) 295-8134. If, because of the size of the Product or nature of the defect, the Product cannot be returned to TOTO®, receipt by TOTO® of written notice of the defect together with proof of purchase (original sales receipt) shall constitute delivery.
  • Página 5: Agarraderas Soiree ™ Y Guinevere

    Notas Las Agarraderas Soiree™ y Guinevere™ deben ser montadas en una superficie segura. TOTO® no se hace responsable por ninguna consecuencia causada por una mala instalación y/o falta de fuerza de la pared. Es responsabilidad del instalador asegurarse que el área de montaje que el cliente elija sea segura y que se estén utilizando herramientas de montaje adecuadas para la instalación.
  • Página 6: Herramientas Y Materiales

    Terminados Disponibles: Cromo Pulido (#CP), Níquel Cepillado (#BN), Níquel Pulido (#PN), Bronce Frotado con Aceite (#RB), Latón Pulido (#PB), Bronce Rosa (#RS) y Níquel Negro (#BL). Las Agarraderas Soiree™ y Guinevere™ cumplen con las directrices ICC/ANSI A177.1, ASTM F446 y CSA. Soiree Guinevere 2-1/2”(64mm)
  • Página 7: Instrucciones De Limpieza

    1. Determine la ubicación 2. Haga los orificios en la pared Asegúrese que la pared tenga suficiente fuerza estructural. Determine la ubicación requerida para la instalación de Deberá montar al menos 2 tornillos en cada pestaña de la agarradera. Para una fácil instalación, se proporciona montaje por tachuela de madera.
  • Página 8: Garantía

    TOTO® con la prueba de compra (recibo de compra original) junto con una carta en donde se plantee el problema, o contactar al distribuidor TOTO® o al contratista de servicios de los productos, o escribir directamente a TOTO® U.S.A., INC., 1155 Southern road, Morrow, Georgia 30260, (888) 295-8134.
  • Página 9: Sauvegardes Importantes

    Remarques Les poignées Soiree™ et Guinevere™ doivent être montées sur une surface sécuritaire. TOTO® n’est pas responsable pour aucune conséquence causée par une installation inadéquate et/ou un manque de résistance murale. C’est la responsabilité de l’installateur de la poignée de s’assurer que la zone de montage choisi par le client est sécuritaire et que la quincaillerie appropriée est utilisée pour l’installation.
  • Página 10: Outils Et Matériaux

    Finitions disponibles : Chrome poli (#CP), nickel brossé (#BN), nickel poli (#PN), bronze huilé (#RB), laiton poli (#PB), bronze rose (#RS), et nickel noir (#BL). Les poignées Soiree™ et Guinevere™ sont conformes aux directives ICC/ANSI A177.1, ASTM F446 et CSA. Soiree Guinevere 2-1/5”(64mm)
  • Página 11: Consignes De Nettoyage

    Déterminez l’endroit Perçage des trous Assurez-vous que le mur possède une résistance structurale Déterminez l’endroit désiré pour l’installation de la poignée. suffisante. Au moins 2 vis à chaque bride de fixation doivent Afin de faciliter l’installation, un trou découpé est fourni sur le côté être montées sur un montant de bois.
  • Página 12 TOTO® U.S.A., INC., 1155 Southern road, Morrow, Géorgie 30260, (888) 295-8134. Si, en raison de la taille du produit ou de la nature du défaut, le produit ne peut pas être retourné à TOTO®, la réception par TOTO® de l’avis écrit du défaut ainsi que la preuve d'achat (reçu de caisse original) constituera la livraison.

Tabla de contenido