EGO HT2400E Manual De Utilización página 10

Cortasetos a batería con acumulador de ion de litio de 56 v
Ocultar thumbs Ver también para HT2400E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
TO INSTALL/REMOVE BATTERY PACK (Fig. 2 & 3)
EN
WARNING:
Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. Removing the
battery pack will prevent accidental starting that could cause serious personal injury.
NOTE:
Fully charge the battery pack before first use.
TO INSTALL (Fig. 2)
 Align the ribs of the battery pack
with the mounting slots in the hedge
trimmer's battery port.
 Press the battery pack down until it
snaps into position.
NOTE:
Make sure that the latch on the
hedge trimmer snaps into place and the
battery pack is secured to the tool before
beginning operation.
TO REMOVE (Fig. 3)
WARNING:
Always be aware for
the location of your feet, children, or pets
when pressing the battery-release button.
Serious injury could result if the battery
pack falls. NEVER remove the battery
pack at a high location.
 Press the battery-release button,
the battery pack will disengage
from the latch.
 Grasp the battery pack and remove it from the hedge trimmer.
18
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
2
3
Press to Release
HOLDING THE HEDGE TRIMMER
The unit has both a front and rear handle.
With the blade directed away from you,
hold the unit by both handles.
The front switch can be activated on
any of the three sides, giving you
many choices for a comfortable grip
when performing cutting operations
(Fig. 4, 5 & 6).
WARNING:
Always keep both
hands on the hedge trimmer handles.
Never hold shrubs with one hand and
operate the hedge trimmer with the other.
Failure to heed this warning may result in
serious injury.
STARTING/STOPPING
THE HEDGE TRIMMER
Before starting the hedge trimmer:
 Make sure you have a secure and
balance footing.
 Stand upright and hold the hedge
trimmer in a relaxed position.
 Remove the blade guard.
 Make sure the cutting blade is not
touching the ground or any other objects.
 Hold the unit with both hands: one hand on the rear handle and one hand on the
front handle.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
4
5
6
19
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido