Ec Declaration Of Conformity; Troubleshooting - EGO HT2400E Manual De Utilización

EC DECLARATION OF CONFORMITY

EN
We, CHERVON EUROPE LTD.
47 CASTLE STREET, READING, RG1 7SR, UNITED KINGDOM
Declare that the product 56V lithium-ion cordless hedge trimmer HT2400E,
Complies with the essential health and safety requirements of the following Directives:
2006/42/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2000/14/EC
Standards and technical specifications referred to:
EN 60745-1, EN 60745-2-15, EN 55014-1, EN 55014-2
Measured Sound Power Level: 94dB(A), Guaranteed Sound Power Level: 94dB(A)
The conformity assessment followed was according to Annex V of the Directive
Peter Melrose
Vice President Of Chervon Europe
20/12/2014
26
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
Dong Jianxun
Quality Manager Of Chervon

TROUBLESHOOTING

PROBLEM CAUSE
◾ ◾
The battery pack is not
attached to the hedge
trimmer.
◾ ◾
No electrical contact between
the trimmer and battery
◾ ◾
The battery pack is depleted.
◾ ◾
The battery pack is too hot.
Hedge trimmer doesn't
work.
◾ ◾
The hedge trimmer is too hot
◾ ◾
The two switch levers are not
depressed simultaneously.
◾ ◾
The blade is jammed.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
EN
SOLUTION
◾ ◾
Attach the battery pack to the
hedge trimmer.
◾ ◾
Remove battery, check
contacts and reinstall the
battery pack.
◾ ◾
.
Charge the battery pack
◾ ◾
Remove the battery pack from
the tool and allow it to cool
until the temperature drops
below 67°C.
◾ ◾
. Release both switch levers;
allow the trimmer to cool until
the temperature drops below
77°C.
◾ ◾
Depress the switch levers
on the front and rear handle
simultaneously.
◾ ◾
Remove the battery pack
from the tool, remove the
obstruction carefully, then
reinsert the battery and restart
the tool.
27