Operation - EGO HT2400E Manual De Utilización

Front Handle
EN
For easy control of the tool during cutting work.
Rear Handle
Ergonomic handle with overmold improves comfort and grip.
Front Switch Lever/Rear Switch Lever
The hedge trimmer can be started only if both of the switch levers (in rear and
front of the handle) are depressed simultaneously.
Blades
Steel blades for cutting hedges and shrubs.
Blade Guard
The blade guard keeps the operator from coming in contact with the sharp blades
when the tool is not in use. It also helps keep the blades from being nicked or
damaged when the tool is in storage.
Tip protector
Protecting the blade and protecting the special cutters from damage when cutting near
the ground or along walls.
Battery Release Button
Press to release the battery pack from the tool.
Latch
Locks the battery pack in place when installed on the tool.
Ejection Mechanism
Aids in removing the battery.
Mounting Slot
Guides the battery pack.
16
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E

OPERATION

WARNING:
Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields, along with hearing
protection. Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended by
EGO TM . The use of attachments or accessories not recommended can result in serious
personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATION
You may use this product for the purposes listed below:
 Trimming and the forming of hedges, shrubs, and bushes with a branch diameter
of less than 22mm
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
EN
17