Sony UPA-P100MD Guia De Inicio Rapido página 4

Features
The UPA-P100MD Digital Capture Unit is used to
record analog images from video devices in JPEG and
TIFF format. It is also capable of saving recorded
images on CD-R disc with the built-in CD-R drive and
of printing images with a digital color printer (UP-
D50, UP-D70XR). Furthermore, if the UPA-P100MD
is connected to a computer or network, users can
preview the images on the device's hard disk using an
Internet browser.
Preliminary Connections
Before using the UPA-P100MD (locally or through a
network), you need to make certain connections. To
make these connections, use the following procedure.
RM-P110 Remote
Control Unit
A B C D
F1 F2 F3 F4 ESC
E F G H I
F5 F6 F7 F8 BS
J K L M N
1 2 3
O P Q R S
4 5 6
T U V W X
7 8 9
Y Z
abc ABC 0 SP ENT
RM-P110
1
Locate the UPA-P100MD's power cord.
2
On the rear panel of the device, locate the AC inlet.
3
Connect the female end of the power cord to the
AC inlet.
4
Connect the RM-P110 Remote Control Unit
connector to the remote control port on the rear
panel. When using a foot switch or other such
external control device, connect the foot switch to
the parallel port on the rear panel of the UPA-
P100MD.
4
The Digital Capture Unit is operated through the RM-
P110 Remote Control Unit (sold separately) or an
external control device (such as a foot switch),
connected to the rear panel of the UPA-P100MD.
Note
The procedures in this quick start guide are based on
Windows 98 dialog boxes and windows. Screen
appearance may differ slightly in other Windows
versions.
AC Power Inlet
5
On the rear panel of the UPA-P100MD, locate the
network port. Connect a LAN cross cable to this
port.
6
Connect the other end of the LAN cross cable to
the network port of your computer. You are now
ready to make preliminary settings.
Note
• Before connecting the unit, make sure that you are
using the appropriate type of cross cable. If you are
not sure of what type of cable to use, ask your system
administrator.
PC
TV OUT
AV S-VIDEO