Sony UPA-P100MD Guia De Inicio Rapido página 7

Accessing the UPA-
P100MD Configuration
Screen
To configure the Digital Capture Unit, you need an
Internet browser installed on your computer. The
settings are made from your browser, in the
configuration screen. Refer to the Digital Capture Unit
User's Guide for details. Follow the procedure below
to access the configuration screen.
1
Start your Internet browser.
Note
Before you proceed to step 2, make sure that your
Internet browser does not use a proxy server.
2
In the address bar of the browser, type the
following:
http://192.168.3.200/
3
Press ENTER. The Sony UPA-P100MD screen
opens.
4
Click [Configuration]. The Sony Digital Capture
Unit UPA-P100MD Configuration screen opens.
To make changes to the configuration screen, please
refer to "The Configuration Screen" in the Digital
Capture Unit User's Guide.
7