Alarm List - Ingersoll Rand EH Serie Manual De Operador

8.8 ALARM LIST

The Microprocessor Controller stores the 20 most recent alarm
conditions. These alarms are stored with the type of alarm as well as
the date and time the alarm occurred.
troubleshooting the dryer and provide an indication of dryer operation
during unattended service. The following describe the method to access
and review the alarms stored in the Microprocessor Controller:
ALARM LIST
SELECT
DISPLAY PRESS ENTER
Depress the SELECT DISPLAY button until the ALARM LIST
display appears.
BEGIN ALARMS
ENTER
Depressing the ENTER button enters the ALARM LIST menu.
SELECT
DISPLAY
Depressing the SELECT DISPLAY button advances the menu
to the current alarm status.
Alarm Condition
Time of Alarm
(Military Time)
8.0 ALARMS AND INDICATORS
This list can greatly facilitate
ALARM OFF
FAIL TO SHIFT
TM 1635
Figure 3 - Alarm Screen Details
EH Series Desiccant Dryer Models 150-8000
http://www.ingersollrandproducts.com
FAIL TO SHIFT
SELECT
DISPLAY TM 1635
Depressing the SELECT DISPLAY list displays the most
recent of the alarms stored by the Microprocessor Control.
Refer to the diagram at the end of this section for an
explanation of the ALARM LIST Display.
Depressing the SELECT DISPLAY button will reveal the previous alarm
condition(s), as well as the remaining available alarm placeholders for
alarms. To EXIT the ALARM LIST, perform the following:
Depressing the button returns the controller to the top of
the ALARM LIST.
Depressing the button again returns the controller to the
CUSTOMER MODE.
DATE 1104
Date of Alarm
(Date-Month)
Example shows April 11
DATE 1104
BEGIN ALARMS
ALARM LIST
PRESS ENTER
9