Ingersoll Rand EH Serie Manual De Operador página 16

Tabla de contenido

Publicidad

Should the program be at a stage whereby the Microprocessor Control
permits the jog feature, the following will be displayed:
JOG: ENT TO JOG
STEP 6 TME10699
Depress the SELECT DISPLAY button until the JOG MODE
display appears. The PRESS ENTER prompt will appear,
along with the current step and remaining time, should the
program be able to advance at this stage.
ENTER
STEP 8 TME00550
Depressing the ENTER button advances the program to the
next step. The display will indicate the next step has been
initiated.
14
9.0 TECHNICIAN MODE
JOG MODE
EH Series Desiccant Dryer Models 150-8000
http://www.ingersollrandproducts.com
NOTICE
The Program Jog advances steps #6, #8, #20 & #22, which are the
longest program steps. The balance of the steps are not advanced in
Program Jog Mode.
NOTICE
To exit the TECHNICIAN MODE, press the "+ / -" key to the initial "SET
OPMODE" screen and depress the
CUSTOMER MODE.
9.10 SHUTDOWN SEQUENCE
When the OFF button is pressed, SHUTDOWN SEQUENCE will be
displayed for 30 seconds. During this time the offline tower will
represurrize. Both main flow valves will open and purged air will cool the
heater element.
button to return to the

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido