Drawer Removal (Lateral And Pedestal) - Steelcase TS Storage Nstrucciones De Instalacion

®
Drawer Removal (Lateral)
Fully extend bottom drawer. Remove as shown in
fig. 1. Repeat for top drawer.
Using a flat head screwdriver, pry raised bin slot
upward off tab retaining feature lift and remove
drawer from lateral.
FILE DRAWER
SLIDE
LATERAL
Fig. 1
PRESS
DOWN
PULL UP
NOTE:
Screwdriver should
come in from the top of the slide.
Under worksurface pedestals and
laterals to be used only with worksurfaces
that are mounted to kick panels.
Drawer Removal (Pedestal)
Fully extend file drawer. The file drawer must be removed first to
allow clearance for box drawer removal.
Separate the drawer slide members from the cabinet members by
depressing the slide connect levers on the sides of the drawer bin
and pulling the drawer forward (see fig. 2).
Remove the box drawers using method shown in fig. 1.
Fig. 2
2
(See Fig. 1 for removal)
WARNING:
1
BOX DRAWER
SLIDE
FILE DRAWER
PEDESTAL
Page 2 of 57
P/N 939504734
Doc # 70305 Rev J