Dyson Pure Hot+Cool HP01 Guia Del Usuario página 11

Replacing the filter unit
1
When your non-washable filter unit needs replacing the machine
will display the pattern shown. To replace the non-washable filter
unit, follow these steps. If the machine has been in use, leave for
1 to 2 hours before replacing the filter unit to allow the machine
to cool down completely. Your Dyson machine is programmed
to remind you to replace the filter unit after 12 months based
on 12 hours usage a day. Please note that your indicator will
activate sooner with more use. The indicator is only a guide. Use
in heavily polluted environments may require the filter unit to be
replaced more regularly.
4
8
6 sec
2
5
clik clik
A clockwise-rotating loading pattern
will be shown on the LED display.
When you have reassembled your machine, press and
hold the Standby on/off button for 6 seconds on the
remote control to reset the filter indicator.
3
6
clik
Once the loading pattern is complete,
the machine will return to its normal usage.
7
clik
11