Danby DR202WGLP Manual Del Propietário página 15

INSTALLATION INSTRUCTIONS
Recommended gas and electric supply location
When using test pressures greater than 1/2 psig to pressure test the gas supply system of the residence,
disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures
of 1/2 psig or less to test the gas supply system, simply isolate the range from the gas supply system by
closing the individual shut-off valve.
Note: Recommended gas hook-up locations behind the range. Gas and shut-off valve should not protrude
more than 2" from the wall to allow the range to rest against the wall.
Check local codes before making connections.
Fire hazard: Do not use a fl ame to check for gas leaks.
1
2
WARNING
14
1. Electrical connection area
2. Gas hook-up area
A. 20 3/8"
B. (minimum distance to
walls above the cooktop
on each side): 2"
C. 2"
D. 2 1/2"