Maintenance And Care; Disposal Information; Ce Declaration Of Conformity - Flex ALC 311 Manual Del Usaurio

Line laser

Maintenance and care

Cleaning
If the power tool is damp after use, wipe the
power tool and accessories with a dry, soft
cloth.
Do not use solvents or abrasive cleaning
agents to remove dirt. Use a clean cloth
moistened with water and a mild detergent.
Remove dust, etc. from the discharge
windows for the laser beams (8, 9) with
a soft cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Accessories
Spare-part/Accessory
Clamping column
Elevator tripod, medium-sized
(0.65–2.00 m)
Elevator tripod, large
(0.90–2.85 m)

Disposal information

In observance of European Directive 2002/
96/EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Please ask your dealer about disposal
options for redundant power tools.

CE Declaration of Conformity

Order
no.
We hereby declare that this product
corresponds with the following standards
312.096
or normative documents:
312.118
EN 50082-1, EN 55022 in accordance
with the regulations stipulated in the
directive 89/336/EWG.
312.126
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
D-71711 Steinheim/Murr
Only for EU countries
Do not dispose of electric tools
together with household waste
material!
Note!
04
Rühle Severin
17