Programming The Swc; Programming The Swc, All Other Vehicles - Axxess CLASSII-100 Instrucciones De Instalación

Ocultar thumbs

página de 24

/ 24
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

In Class II vehicles, there are two ways to program the SWC. If your vehicle is not on the

following list please refer to the "All Other Vehicle" section.

BUICK

Rainer

CADILLAC

Escalade (all models)

CHEVROLET

Avalanche

Caviler

Silverado (classic)

Silverado

SSR

Suburban

Tahoe

Trailblazer

GMC

Envoy

Sierra (classic)

1. Turn on the ignition.

2. Turn on the radio.

3. The LED on the GMOS-100 will begin to blink rapidly.

4. Turn on the aftermarket radio.

5. Tap volume up until radio responses.

All Other Vehicles

1) Turn "On" the ignition.

2) The LED will go on solid.

The following buttons must be pressed in order:

• Volume Up, Seek Up, Band, PTT/Mute, Fan Up (each button pressed will be

acknowledged with the LED on steadily).

• If any of the above buttons are not present, substitute with Volume Up.

For example, if a vehicle does not Band and Fan Up, you would press Volume Up,

Seek Up, Volume Up, PTT/MUTE, Volume Up.

• After you have pressed all five buttons, the LED will turn "Off".

CLASSII-100