Environmental Notice - Braun 9 Serie Manual Del Usuario

Accessories
Braun recommends changing your shaver's
Foil & Cutter cassette every 18 months to maintain
your shaver's maximum performance.
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette: 92S/92M
• Braun Shaver cleaner spray
Trouble-Shooting
Problem:
Shaver
Shaver does not start when
pressing the on / off
button.
Charging does not start
when connected to power
socket.
Shaver does not charge
completely and keeps
blinking.
Unpleasant smell from the
shaver head.
Battery performance
dropped significantly.
Shaving performance
dropped significantly.
Guarantee
We grant a 2 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate any defects in the
appliance resulting from faults in materials or
workmanship, free of charge either by repairing or
replacing the complete appliance at our discretion.
This guarantee extends to every country where this
appliance is supplied by Braun or its appointed
distributor.
This guarantee does not cover: damage due to
improper use, normal wear and tear (e.g. shaver foil
or cutter block) as well as defects that have a
12
90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd 12 90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd 12
Business Use - P&G AUTHORIZED POA-00101223 Rev 001 Effective Date 2019-01-23 Printed 2019-08-27 Page 12 of 104
Possible reason:
1. The shaver can only be operated
cordless.
2. Travel lock is activated.
1. Sometimes charging starts
delayed (e.g. after long storage).
2. Ambient temperature is out of
valid range.
3. Power supply is not plugged into
the shaver properly.
Ambient temperature is out of valid
range.
Shaver head is cleaned with water. When cleaning the shaver head with water
1. Foil and cutter are worn which
requires more power for each
shave.
2. Shaver head is regularly cleaned
with water but not lubricated.
1. Foil and cutter are worn.
2. Shaving system is clogged.

Environmental notice

Product contains batteries and / or recyclable
electric waste. For environment protection,
do not dispose of in household waste, but for
recycling take to electric waste collection
points provided in your country.
Subject to change without notice.
Remedy:
1. Unplug the shaver.
2. Press the on / off button for 3 seconds to
unlock the shaver.
1. Wait a few minutes. Charging will start
automatically.
2. Recommended ambient temperature for
charging is 5 °C to 35 °C.
3. Power supply needs to snap in.
Recommended ambient temperature for
charging is 5 °C to 35 °C.
only use hot water and from time to time
some liquid soap (without abrasive
substances). Remove Foil & Cutter cassette
to let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine oil
on top of the foil once a week for
lubrication.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette into hot
water with a drop of dish liquid. After-
wards rinse it properly and tap it out.
Once dry apply a drop of light machine oil
on the foil.
negligible effect on the value or operation of the
appliance. The guarantee becomes void if repairs
are undertaken by unauthorised persons and if
original Braun parts are not used.
To obtain service within the guarantee period, hand
in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service
Centre (address information available online at
www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under
statutory law.
18.01.19 10:34 18.01.19 10:34