Digital Multimeter; Overview; Safety Information; Safety Standards - koban KMD 06 Manual De Instrucciones

KMD 06

Digital multimeter

Overview

Warning
To avold electrical shock or personal injury, please read all safety
information,warnings and pracautions before using the meter.
The KMD 06 is a small, safe and reliable 3 ½ digit handheld multimeter.
This meter can measure AC/DC voltage, AC/DC current, resistance, diode,
continuity, battery test and non-contact voltage tests. This tool is ideal for
professionals and hobbyists alike.

Safety information

Safety standards

The KMD 06 meets the following safety standards: EN61010-1 standards for
electronic testing instruments. This meter meets EN61010-1 standards for
CAT III 600V installations and a pollution degree of 2.
• The protection provided by the meter can only be ensured if all safety
procedures are strictly followed.
• The safety symbols on the meter are to advise of potential dangerous
situations. Caution is required when measuring close to the meter's safety
limits.
• Never exceed the protection limit values indicated in the specifications for
each range of measurement.
Precautions
• To avoid electrical shock or personal injury, observe and follow all safety
precautions.
• Check the meter for damage before use. Do not use if any damage is
observed.
• Check de test leads for cracks or exposed wires before using the meter.
Replace if necessary.
• Ensure the meter works properly by testing a known voltage source first. If
not working properly, the protective equipment may be damaged, have the
meter serviced before using.
• Never measure voltages that may exceed the protection limit indicated on
Instructions manual | 16 www.grupotemper.com