Troubleshooting; Reset - hafele EFL 30 Manual De Instrucciones

9. Troubleshooting

Fault when opening
Acoustic signal is heard
twice.
LED does not change
from red to green.
Lock does not open.
Fault when locking
Lock does not close.
If the faults cannot be remedied, contact your responsible DIALOCK technician or
www.hafele.com.

10. Reset

A reset is required for maintenance purposes or for remedying faults.
There are two reset options:
• Simple reset,
• complete reset.
Possible cause
• User key is not authorised.
• Distance between user key
and antenna too great.
• User key is not authorised.
• User key is not recognised. • Check lock installation conditions
• User key is not authorised.
• Locking mechanism sticks /
stiff.
Possible cause
• Lowering of locking
mechanism after loading
the furniture item.
• Closing mechanism
defective.
• Batteries dead
Remedy
• Program the user key.

6. Programming user keys, page 36
• Observe the maximum distance of
25 mm between the user key and
antenna.
• Program the user key.

6. Programming user keys, page 36

4.1 Installation references, page 32
• Program the user key.

6. Programming user keys, page 36
• Lock is under tension. Check loading of
furniture item.
• Adjust locking mechanism. Note
adjustments and tolerances!

4.1 Installation references, page 32
Remedy
• Adjust locking mechanism. Note
adjustments and tolerances!

4.1 Installation references, page 32
• Check closing mechanism.
• Replace batteries
45