Adjusting The Open Time - hafele EFL 30 Manual De Instrucciones

8.3 Adjusting the open time

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED illuminates
green.
3. Hold the clearing key card in front of the
antenna again.

An acoustic signal is heard at one second
intervals.

The LED flashes green in parallel to the
acoustic signal every second (max. 30
seconds).
The open time can be adjusted at any time, and is also retained after a power supply
interruption or a simple reset.
The open time can be extended to beyond 30 seconds using a macro with the
MDU 110 mobile programming unit with special functions (
31).
After a complete reset, the set open time is cleared and the factory setting of 3
seconds or deadbolt lock operation are activated.
44
Tag-it ™ISO
Programming key card
1x/s 1x/s
Tag-it ™ISO
Clearing key card
x
2. Hold the clearing key card in front of the
antenna.

Acoustic signal is heard. The LED flashes
quickly in green.
4. Remove clearing key card after the required
time.


The LED illuminates permanently in red.

The open time is set for all locks and
authorised user keys.

3.2 Technical data, page