Programming A User Key With Deadbolt Lock Function - hafele EFL 30 Manual De Instrucciones

6.3 Programming a user key with deadbolt lock function

Tag-it ™ISO
Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Hold the programming key card in front of the
antenna again during the 5-second period.

Acoustic signal is heard twice. LED flashes
green even more slowly.
5. Remove user key.

LED continues to flash green slowly.
7. Repeat steps 4 to 6 until all necessary user keys have been granted the locking authorisation.
8. The LED switches to red once the 5 seconds have elapsed.
Programming key card
5 s
2. Hold the programming key card in front of the
antenna again during this 5-second period.

2x 1x/s
4. Hold the user key in front of the antenna during
the 5-second period.

1x/s
6. Hold another user key in front of the antenna
during the 5-second period.

User keys
2x
Acoustic signal is heard twice. LED flashes
green more slowly.
Acoustic signal is heard. Locking
authorisation is allocated.
Acoustic signal is heard. Locking
authorisation is allocated.
2x/s
39