Chapter 1. Machine Description, Identification, And Certification; About This Milnor ® Machine-42-Series, Divided Cylinder Washer-Extractor; Functional Description; Machine Identification - Milnor 42044CP2 Mantenimiento

1
Chapter
Machine Description, Identification,
and Certification
BIUUUF01 (Published)
1.1. About This Milnor
Washer-extractor
This manual applies to the Milnor products whose model numbers are listed inside the front cover
and which are in the families of machines defined below.

Functional Description

1.1.1.
Washer-extractors wash linen using water and nonvolatile chemicals and remove excess water
by centrifugal force.
42-series, Divided Cylinder Washer-extractor models are suspended washer-extractors with a
42 inch (1067 mm) diameter, walled cylinder for processing separate loads simultaneously.
42-series Staph Guard
barrier applications.

Machine Identification

1.1.2.
Find the model number and other data for your machine on the machine data plate affixed to the
machine. See the figure that follows.
Book specs- Dates: 20120626 / 20120626 / 20140710 Lang: ENG01 Applic: HD4
®
Machine—42-series, Divided Cylinder
®
models are front-loaded and rear-unloaded for use in soil-side/clean-side
9

Chapter 1. Machine Description, Identification, and Certification

PELLERIN MILNOR CORPORATION