Milnor 42044CP2 Mantenimiento página 40

Chapter 3. Routine Maintenance
Maintenance Components—Large Extractors
3.1.6.
Figure 16: Grease Ports for Drive Bearings—42044WP_ and 42044SP_ Models
Front Bearing—42044WP_
Soil Side Bearing—42044SP_
Jackshaft Bearings—42044WP_ and
42044SP_
1. Grease port for bearing. One place.
2. Grease port for seal. One place.
3. Breather for bearing housing. Keep clean.
4. Relief port for seal grease. Remove spilled grease.
5. Relief port for bearing grease. Remove spilled grease.
6. Grease ports for jackshaft bearings. Three places.
7. Grease ports for Idler shaft bearings. Two places.
.
PELLERIN MILNOR CORPORATION
[Document BIWUUM03]
Rear Bearing—42044WP_
Clean Side Bearing—42044SP_
Idler Shaft Bearings—42044SP_
Legend
36