Fastening The Mount - NEW ENERGY KACO blueplanet 87.0 TL3 Instrucciones De Operación

1
EN
6
5
Fig. 7: Opening the cardboard packaging
Legend
1 Hood
2 Upper side section
3 Clip lock (4x)
5.3

Fastening the mount

A
D
Fig. 9: Minimum clearances for wall mounting
Legend
1 Mount
2 Fixings for mounting
3 Lock washer
Minimum clearance: 120 mm
A Recommended clearance 400 mm (without device
475 mm *)
B Minimum clearance: 300 mm
↻ Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1 Mark the mounting position on the wall surface according to the position of the mount by drawing a line.
2 Mark the positions of the drill holes using the slot in the mount.
NOTE: The minimum clearances between two devices, or the device and the ceiling/floor have already been taken
into account in the diagram.
Page 14
2
3
DETAIL Z4:1
4
153 mm
2
75 mm
1
B
A
6
A
Detail A
C
5
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Fig. 8: Setting the device upright
4 Base section
5 Lower side section
6 Cardboard packaging with mount and mounting kit
550 mm
458 mm
3
1066 mm
4
475 mm*
270 mm
Fig. 10: Wall mounting
4 Fastening screw (4x)
5 Securing screw (1x)
6 Lug to mount the device
C Minimum clearance: 500 mm
D Recommended clearance: 1000 mm
453 mm
475 mm*
270 mm
KACO blueplanet 137 TL3 KACO blueplanaet 150 TL3
1
5
6