Special Functions - Grundig MUSIC 8000 DAB+ Manual De Instrucciones

SPECIAL FUNCTIONS

Call up the software version
1
Open the menu with »MENU«.
2 Select the option »SYSTEM« with »TUNING«
and confirm by pressing »SEL/ATS«.
3 Select the option »SW VER« with »TUNING«
and confirm by pressing »SEL/ATS«.
– Display: actual software version.
4
Press »MENU« to end the display.
Deleting all settings (Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1
Open the menu with »MENU«.
2 Select the option »SYSTEM« with »TUNING«
and confirm by pressing »SEL/ATS«.
3
Select the option »RESET« with »TUNING«
and confirm by pressing »SEL/ATS«.
– A safety confirmation is displayed.
4
Select the option »Y« (Yes) with »TUNING«.
Note:
To cancel the function select the option »N«
7
(No) by pressing »TUNING«.
5
Press »SEL/ATS« to confirm setting.
– Display: »RESTART«.
Set the display illumination
You can choose to illuminate the display either
permanently or only for 10 seconds.
1 Open the menu with »MENU«.
2
Select the option »SYSTEM« with »TUNING«
and confirm by pressing »SEL/ATS«.
3 Select the option »BACKLITE« with »TUNING«
and confirm by pressing »SEL/ATS«.
4 Select the desired option (»10 SEC« or »ON«)
with »TUNING« and confirm by pressing
»SEL/ATS«.
5
Press »MENU« to end the setting.
--------------------------------------------------------------------------------------------
Removing DAB radio stations
from the program list
If you move to a different part of the country, you
should remove DAB radio stations, which are no
longer available from the program list.
These DAB radio stations are marked with "?".
1 Open the menu with »MENU«.
2
Select the option »PRUNE« with »TUNING« and
confirm by pressing »SEL/ATS«.
– A confirmation message is displayed.
3 Select the option »Y« (Yes) with »TUNING«.
Note:
To cancel the function select the option »N«
7
(No) with »TUNING«.
4
Press »SEL/ATS« to confirm setting.
– Display: »RESTART«.
5 Press »MENU« to end the setting.
– In the program list you will find only avail-
able radio stations.
Software Update
You can install the latest version of the software,
if available.
1
Connect the device to a PC by means of the
socket located in the battery compartment.
2 Open the menu with »MENU«.
3
Select the option »SYSTEM« with »TUNING«
and confirm by pressing »SEL/ATS«.
4
Select the option »UPGRADE« with »TUNING«
and confirm by pressing »SEL/ATS«.
– A confirmation message is displayed.
5 Select the option »Y« (Yes) with »TUNING«.
– Display: »WAITING«.
Note:
To cancel the function select the option »N«
7
(No) with »TUNING«.
6
Start the update program on the PC.
7 Once the software is updated successfully, re-
move the device from the PC.
ENGLISH
25