Analog Mode - ABB Busch-Dimmer 6597-500 Manual De Instrucciones

Modes of operation

Analog mode

● 0 - 10 V or 0-20 mA operation
changeover switch • 1 on the
("off" = 0 - 10 V "on" = 0 - 20mA)
B th channels operate synchronously. The device is o
switched off below a threshold of 10% of the input signal;
above this threshold, the device switches on with the
minimum brightness level and reaches maximum
brightness level at 100%.
If the analog operation = switching/dimming
is to be separated, please (see page 38).
ENG
is selected via the
coding switch.
40