Modes Of Operation/Fig; Assignm Ent Of The Coding Switch - ABB Busch-Dimmer 6597-500 Manual De Instrucciones

Modes of operation/Fig. 4

23 Modes of operation/Fig. 4
Assignm ent of the coding switch
T he factory setting of all the pins and the cha
sw tch in the coding switch (see Fig. 4) is "off ". i
1 = Soft
So ft OFF, on = aktivated
2 =
Staircase lighting, on = aktivated
3 =
4 = "Vacation", on = aktivated
5 = Cleaning light, on = increased
brightness level
6 = Swit
on=switch in p
Selbsttest, on = aktivated
7 =
8 = Reset, on = aktivated
•1 = Change-over switch for control
output
off = 0 – 10 V, on = 0 – 20 mA
ON, on = aktivated
nalog operation
ch for a
ushbutton T1 activated
ENG
nge-over
Fig. 4
35