ABB Busch-Dimmer 6597-500 Manual De Instrucciones página 37

Modes of operation
turned off by s
by a further 3
the on phase.
"Vacation"
The control module automatically stores output states for
each channel (D1/D2) at intervals of 6 minutes. These are
overwritten after 24 hours, starting with the "oldest" value.
T h ese stored values have no effec
● Push pi n 4 on the coding switch to "on".
Th e sto red signals are automatically repeated in
hour c ycle.
oft OFF. This interval can be extended
min. by actuating the pushbutton during
Operation via pushbutton
mode of operation. The vacation function is
interrupted and continued only after switch-
off by the pushbuttons. After a power failure
a time-shift of the "vacation data" may occu
ENG
t in the "off" position.
is possible in this
37
a 24
,
r.