ABB Busch-Dimmer 6597-500 Manual De Instrucciones página 39

Modes of operation
Self-test
T he self-test checks the connection and the function o
co nected 6583-xxx central dimmers. n
● Push pin 7 on the coding switch t
Afterwards, the following signals are transmitted
continuously on both channels:
– D1: soft ON, 1 second maximum brightness level soft
OFF, 1 second pause, then
– D2: as above for D1
● Push pin 7 back to "o
Re set
● Push pin 8 on the coding switch to "on":
– All the stored values are deleted
– All the functions are deactivated
– Operation via pushbutton/switch is not possible
● Push pin 8 back to "off" to end the reset and re-
activate the previous functions.
ff" to end the self-test.
ENG
o "on".
39
f the