Modes Of Operation - ABB Busch-Jalousiecontrol II 6411 U-101-500 Manual De Instrucciones

Modes of operation

b. Modes of operation
Normal operation (N) = factory setting
● Application example: Moving the shutter UP/DOWN
● A brief actuation (tapping) of the operating area
triggers a motion command that moves the shutter to
the upper or lower limit position. If this is done again,
the up/down motion is suspended.
● If the operating area is pressed continuously, the
shutter moves up/down as long as this is done. If this
is done for more than three minutes, the flush-type
insert is switched off.
Adjustment of louvres (L)
● Application example: Moving the shutter UP/DOWN
and slat adjustment in small steps.
● The brief actuation (tapping) of the operating area is
identical to normal operation.
ENG 57