ABB Busch-Jalousiecontrol II 6411 U-101-500 Manual De Instrucciones página 64

Installation
22 Installation
Switch off the supply voltage!
The unit is suitable for installation in conventional
flushmounted boxes; we recommend installation in a
branchcircuit switch box with an installation depth of 60
mm.
● When connecting, take note of the connection
examples Fig. 2, 3 and 4.
● Always check the direction of motion of the shutter.
a. Installation in conjunction with an operating
element
Installation site
When combined with the 6066 IR operating element, the
installation site should be within the stated IR receiving
range (see Fig. 12 and 13). Take into account the fact that
the IR receiving range can change as a result of outside
light (e.g. solar radiation, lighting).
ENG 64