Important Warning; Unpacking; Storage; Power Supply - Robot Coupe Mini MP 170 V.V. Manual De Instrucciones

In order to prevent accidents such as electrical shock, personal injury, fire, and in order to limit property/product damage when using
your power mixer, follow the instructions hereafter very carefully and strictly adhere to them. This manual should be kept nearby for
reference and should be read by all first time users of the power mixer.
• Carefully remove the equipment from the packaging
and take out all the boxes or packets containing
attachments or specific items.
WARNING- some parts are very sharp e.g. blade.
Wear cut-resistant gloves when handling the blade.
• You are advised to install the wall support
provided with the machine and to store your machine
on it.

POWER SUPPLY

• Always check that your power supply corresponds
to that indicated on the serial number plate on the
motor unit and that it is properly sized.

SPECIFICATIONS

• The standard machine is operated on a standard
120 Volt, 60Hz., 15 Amp outlet.

IMPORTANT WARNING

UNPACKING

STORAGE

B
D
Blade Attachment Capacities
• Thanks to a very powerful motor, the Mini MP
170 V.V. can process up to 4
Mini MP 220 V.V. up to 7 quarts. The quality of the
finished product is outstanding.
DIMENSIONS (in inches)
Mini MP Mini MP
170 V .V . 220 V .V .
A
A = 3 A = 3
3 1
B = 18 / B = 20 / ,
8 4
C = 2 1 / C = 2 1 /
2 2
5 5
D = 6 / D = 8 /
8 8
C
3 / quarts and the
8
W A R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
• Safeties on motor : Thermal and overload protection.
If there is an obstruction in the container (a spoon or
ustensil) or the machine is overused and becomes hot
the power mixer will stop. If the power mixer stops
because of a thermal overload (power mixer is too
hot), wait for a period of up to 30 minutes for the
power mixer to cool down before restarting.
• No volt release safety (Supply failure).
If there is a power failure or the machine is unplug-
ged, it will not restart by itself. See section on
operating the power mixer.
Be careful when handling the blades. They are very
sharp ! Wear cut-resistant gloves when handling
the blades.

SAFETY

WARNING

5