Assembly / Disassembly; Splash Guard Assembly - Robot Coupe Mini MP 170 V.V. Manual De Instrucciones

ASSEMBLY /
DISASSEMBLY
• MIXER ASSEMBLY
Attaching the shaft to the motor unit.
- Unplug the power mixer.
- Note that each end of the shaft has a threaded
plastic piece. One is longer than the other and
doesn't have a rubber "O" ring. Insert this longer
A
plastic end into the motor housing
turn the shaft in the direction of the arrow until it is
tight.
Removing the shaft from the motor unit
- Unplug the power mixer.
- Turn the shaft counterclockwise until it is removed.
Attaching the bell to the tube
- Unplug the power mixer.
B
- Insert the threaded shaft into the housing
of the bell. Turn the bell in the direction of the
arrow (see drawing) until it is tight.
TURN TO ATTACH BELL
, and
B
Removing the bell from the tube
- Unplug the power mixer.
- Turn the bell in the direction of the arrow (see
drawing below) to detach it from the tube.
Removing the blade
- Unplug the power mixer then, hold the blades
with the provided blade-locking tool.
A
- Using the blade-locking tool, unscrew the
drive coupling then remove the blade for easy
cleaning.
B
A
Cover the ring with the splash guard protection
TURN TO REMOVE BELL
sliding it all along the foot A in the arrow 1 direction,
the flange B must be oriented down.
To remove the splash guard protection for cleaning
follow this instruction in the reverse order.
B
LADE LOCKING
B
LADES WITH WATERTIGHT SEALS
B
ELL
R
EMOVAL DIRECTION
D
RIVE COUPLING
B
LADE REMOVAL
SPLASH GUARD
ASSEMBLY
7