AKG WMS40 Modo De Empleo página 16

1.
2a. 2b.
3.
4.
Fig. 6: Mounting the microphone.
16
2. Use the cable compartment lid (1) to
pull the microphone cable (2) down to
the point that the microphone (3) will
rest against the microphone com-
partment (4).
3. Set the microphone clamp (5) parallel
to the microphone (3).
4. Press the microphone (3) into the
microphone compartment (4) to the
point that the microphone (3) snaps
into place.
5. Stow the microphone cable (2) in the
cable compartment and replace the
cable compartment lid (1) on the
cable compartment.
5.
4.5 Handheld Use
For interviews and similar applications,
you can hold the transmitter in your
hand like a normal microphone.
Talk into the microphone from approx.
1 foot (30 cm) away.
4.6 Replacing the Clip (Fig. 7)
1.
2.
Fig. 7: Replacing the Clip
If the color code clip looks too garish
you can replace it with the supplied
black clip.
1. Use a screwdriver to lever the clip (1)
away from the front end of the trans-
mitter (2).
4.
3.