Transferring Settings; Lift And Hold; Transfer Function - Thermador MASTERPIECE Serie Guía De Uso Y Cuidado

Ocultar thumbs Ver también para MASTERPIECE Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Transferring settings

Lift and Hold

As soon as you lift or move the cookware on the
cooktop, all of the settings for the cooking position are
saved for a short amount of time (10-90 seconds). The
cooking position does not heat.
Note: For the duration of the Lift and Hold time, you can
change the settings of the cooking position (exception:
boost function and timer).
Place the cookware back on the same position within the
duration of the Lift and Hold time. The settings are
automatically transferred. The cooking position heats up
again.
Notes
If the position differs significantly from the original
position, use the transfer function
To find out how to change the duration of the Lift and
Hold time see section Settings.

Transfer function

With this function, you can transfer all the settings of one
cooking position to another cooking position.
Place the cookware at another position on the cooking
1.
surface within the duration of the Lift and Hold time.
The new cooking position is detected.
Note: The transfer function is no longer available if
you:
change a setting in the meantime (exception:
settings on the cooking position with Lift and Hold)
move the cookware again
Touch the
symbol. The settings have been
ï
2.
transferred.
Note: If this symbol
appears in the cooking
position display, the
settings could not be
transferred fully. Lift the
cookware or move it on the
cooking surface. Make the
settings for the cooking
position again.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido