Changing Settings; Display Calibration; Setting Display Brightness - Thermador MASTERPIECE Serie Guía De Uso Y Cuidado

Setting Description / Options
HIBERNATE You can set the duration of the Hibernate mode. After the specified period, the appliance will
switch off completely. While in Hibernate mode, the appliance is ready to operate immediately.
0.5-72 hours (1 hour*)
RESET ALL You can reset all settings to the factory default settings.
* Default settings

Changing settings

The cooktop must be switched on.
Touch the settings symbol
1.
displayed.
Touch the display area for the desired setting.
2.
Set the desired value or option.
3.
Touch the ENTER symbol. The setting has been
4.
saved.
18
. The settings menu is
õ

Display calibration

With this function, you can optimize the display's
responsiveness to touch.
Note: . The touch display is precalibrated in the factory.
However, recalibration may be necessary to improve the
precision of the inputs on the touch display.
Touch the settings symbol
1.
displayed.
Touch the display symbol
2.
CALIBRATION appear in the display.
Touch CALIBRATION.
3.
Follow the instructions on the display.
4.
The touch display has been calibrated.

Setting display brightness

With this option, you can change the brightness of the
touch display.
Touch the settings symbol
1.
displayed.
Touch the Display symbol
2.
CALIBRATION appear in the display.
Touch BRIGHTNESS. The display to set the brightness
3.
appears.
Touch the or symbol and set the desired
@ A
4.
brightness.
Touch ENTER. The setting has been saved.
5.
õ . The settings menu is
. BRIGHTNESS and
î
. The settings menu is
õ
. BRIGHTNESS and
î