Basic Settings - Thermador MASTERPIECE Serie Manual De Instrucciones

Ocultar thumbs Ver también para MASTERPIECE Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic settings

The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display
Function
™‚
Automatic child lock/panel lock
Off*
On
Sound signals
™ƒ
Confirmation signal and operating error signal off
Only operating error signal on
All signals on*
ƒ
Length of timer end signal
™‡
10 seconds*
ƒ
30 seconds
1 minute
Power Management Function
™ˆ
This limits the total power of the cooktop. There are 17 setting levels. Increasing the setting level
increases the power of the cooktop by 500 W.
= 1,000 W minimum power
. -
= maximum power
Š
Selection time for heating element
™Š
Unlimited*: You can adjust the settings of the last heating element used at any time without hav-
ing to select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
selecting it. After that you will have to reselect the heating element before setting it.
Reset to basic settings
™‹
Off*
Reset the appliance to basic settings
*factory settings
Changing the basic settings
The cooktop must be turned off. The timer must not be
activated.
Turn on the cooktop with the main switch.
1.
Within the next 10 seconds, touch PANEL LOCK until
2.
you hear a beep.
™‚
and
will appear on the display.
Touch PANEL LOCK repeatedly until the indicator for
3.
the desired function appears in the upper left corner of
the display area.
. = 1,500 to 8,500 W
Use the number keys until the desired value appears
4.
in the upper right corner of the display area.
Touch PANEL LOCK again for 4 seconds. You will
5.
hear a beep. The setting is activated.
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Masterpiece cit304kbMasterpiece cit304kbbMasterpiece cit304km

Tabla de contenido